16amp/3.6kw or 32amp/7kw Versions Available
eoMINI units are designed for installation in both open air or protected environments, with a universal (Type 2) Socket with the Mode 3 charging standard. This model is available with a type 1 tethered lead, a type 2 tethered lead or a 32A 7KW universal socket.
Eligible for the Workplace Charging Grant Scheme
J1772 (Type 1) Mode 3 charging unit c/w 5m tethered lead
The WallPod EV Commercial Charge range is a low-cost, entry level commercial charging unit, designed to offer full Mode 3 fast charging for all Electric Vehicles (EVs) on the market.
Eligible for the Workplace Charging Grant Scheme
IEC 62196 (Type 2) single phase Mode 3 charging socket(s) c/w hatchlock
The versatile BasicCharge: EV Pedestal can be either surface or root mounted and includes Mode 3 charging socket(s), hatchlock facility, built-in overload protection and a LED status indicator.
Eligible for the Workplace Charging Grant Scheme
IEC 62196 (Type 2) single phase Mode 3 Charging sockets c/w security hatchlock
The SecuriCharge: EV Wall Unit is a robust, heavy-duty, hard-wearing, vandal resistant EV charging unit specifically designed and manufactured for public facing and exposed locations.
Eligible for the Workplace Charging Grant Scheme
16amp/3.6kw or 32amp/7kw Versions Available
eoMINI units are designed for installation in both open air or protected environments, with a universal (Type 2) Socket with the Mode 3 charging standard. This model is available with a type 1 tethered lead, a type 2 tethered lead or a 32A 7KW universal socket.
Eligible for the Workplace Charging Grant Scheme
3.7kW / 7kW / 11kW / 22kW power ratings available
The EO Basic Work Charger is a a simple plug and play charging solution designed for charging up at work. The Advance socket with auto-lock can charge all makes of electric vehicles on the market and the unit is guaranteed for three years.
Eligible for the Workplace Charging Grant Scheme
3.7kW / 7kW / 11kW / 22kW power ratings available
The Genius Charger can be connected to the eoHUB for remote management. The unit has been designed for charging at the workplace. eoHUB comes connected to eoCloud and eoApp for charger management via smartphone.
Eligible for the Workplace Charging Grant Scheme
Retroflo have been installing electric vehicle charging points since 2013. We are OLEV approved for both domestic and commercial installations and will claim the grant on the customers behalf if appliciable. Retroflo have a wealth of experience and knowledge of the different makes and models available. The map below (May 2017) shows our install base in the North-east alone, with over 500 sites being installed and commissioned.
CLIENT: Jotron Ltd
DATE: October 2017
PROJECT: Installation of 2no Commercial EV charging pedestal via time clock and contactor.
SCOPE OF WORK:
Project included civil works including trench and internal wall break out for cables, back filling trench works, form shutter and form concrete plinth works. Electrical work included installing SWA cabling to trenches, installing distribution board, time clock, contactor and 2x 16A pedestal units to plinth.